Protoform 1/10 P63 Pro-Lite (0.5mm) Clear Body for 190mm TC / PRM158020

Protoform 1/10 P63 Pro-Lite (0.5mm) Clear Body for 190mm TC / PRM158020

PRM158020
675118178141
HAN: PRM158020
PRM

39,99 €

inkl. 19% USt.

Artikel auf Lager
Lieferzeit: 1 - 4 Werktage (DE - Ausland abweichend)

Artikel im Shop Friesenheim aktuell NICHT verfügbar
Sie möchten den Artikel bei uns anschauen oder abholen?
Kein Problem, melden sie sich bei uns!

Stk

Kauf auf Rechnung

schnelle Bearbeitung

Beschreibung
Bewertungen
Frage zum Artikel

Key Features

Aggressive High-downforce, Low-CG Design
Stiffening Contours Throughout the Design
High Flow Rear Bumper
Easy to Mount
Made in the USA, since 1982

In The Box

(1) P63 Clear Body
(2) Wing Buttons
(2) Under-wing Nuts
(2) M3 x 6 Black Screws
(1) Decal Sheet
(1) Window Masks
(1) Paint-then-peel Overspray Film

Introducing PROTOform's latest aerodynamic solution for high-competition 1/10 Electric Touring Car Racing, the P63.

This ultra high-downforce, super low-CG aerodynamic body shell was designed with the racer in mind, catering to today's insanely fast 190mm sedans. P63 is packed with modern features for outstanding performance on the track and ease of mounting while preparing to dominate the competition.

Modern Aerodynamic Features:

Radical high-downforce design with a sloped hood and cab-forward layout
Stiffening hood ribs for low deflection in ultra-light weights
Recessed trunk section for low CG and extra stiffness
Sculpted side door panels for increased side-bite
High flow rear bumper area for reduced aero drag

The P63 also features the easiest mounting of any PROTOform body yet. Returning are PROTOform's signature Mounting Marks inside the front wheel arches, allowing you to choose your body positions in 2mm increments up to +8mm. In addition are markings on the hood, decklid, and rear bumper to easily line up your body posts no matter what chassis or rear body post configuration (vertical or horizontal) you prefer.

This body is designed to meet Global Body Spec rules and is made in the USA from high-quality, super-durable polycarbonate. It's available in three weights: X-Lite (0.4mm, for expert drivers only), PRO-Lite (0.5mm, a good all-around option), and Light Weight (0.65, for novice drivers or windy outdoor conditions). Included with the P63 are our convenient plastic wing buttons and under-wing "nuts", with M3 mounting screws. A stylish decal sheet, window masks, and overspray film complete the package.

This is sold as a clear and unpainted body. Image of the painted body is only to display details. No vehicle chassis is included with this product.

PRM158020 | P63 PRO-Lite (0.5mm) Clear Body for 190mm TC

Features

Aggressive High-downforce, Low-CG Design
Stiffening Contours Throughout the Design
Recessed trunk section for low CG and extra stiffness
High Flow Rear Bumper
Easy to Mount

Paint-then-peel Overspray Film Built-in
Made with Crystal Clear Polycarbonate
Made in the USA, since 1982

Four Steps to Competition Ready

Clean Body and apply included window mask
Paint then peel the over-spray film off
Sticker your body (decal sheet included)
Mount your new body onto your Touring Car

Fits

190mm Touring Car

Specs

Length:

16.7" (424 mm)

Width:

7.53" (191.5 mm)

Height:

4.53" (115 mm)

Wheelbase:

10.0" (255 mm) - 10.2" (258 mm)

» Hinweis zu RC Karosserien, Lexan Bodys & Anbauteilen

Lieferumfang & Ausführung – bitte vor dem Kauf kurz prüfen

Kurz & wichtig

RC Karosserien / RC Bodys / Anbauteile können unlackiert, ungeschnitten oder nicht vormontiert geliefert werden.
Bilder zeigen teils lackierte, dekorierte oder fertig aufgebaute Beispielmodelle (Illustration).
Maßgeblich ist immer die Artikelbeschreibung im Shop.

Lexan (Polycarbonat) – richtig lackieren

Klare Lexan Karosserien werden in der Regel von innen lackiert. Die Schutzfolie außen bleibt während der Lackierung drauf und wird erst nach dem Trocknen entfernt.

Profi-Tipps vom RC Multistore Team